Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
   General information on operational materials and adjusting data
   Volumes and frequency of maintenance
   Check of levels of operational liquids
      Engine oil
      Cooling liquid
      Liquid in a windshield washer
      Electrolyte in the rechargeable battery
      Brake fluid
      Oil in the hydraulic booster of steering
      Oil in the automatic transmission
   Survey of tires and check of pressure of air
   Replacement of engine oil and oil filter
   Check and replacement of rubber tapes of brushes of a screen wiper
   Check and adjustment of a free wheeling of a pedal of coupling
   Check, service and charging of the rechargeable battery
   Check, adjustment of a tension and replacement of a poliklinovy belt of the drive of hinged units
   Check and replacement of hoses in a motor compartment
   Shift of wheels
   Check of a condition of seat belts
   Check of a condition of brakes (each 24 000 km or 12 months)
   Replacement of the air filter
   Check of fuel system
   Check of level of oil in the mechanical transmission
   Check of level of oil in the transfer case of cars with the automatic transmission
   Check of a condition of a suspension bracket and steering
   Check of protective covers of power shafts
   Check of level of oil in reverse main gear on all-wheel drive cars
   Replacement of the filter of ventilation of salon on cars since 2001
   Replacement of brake fluid
   Replacement of the fuel filter on release cars till 2001
   Check and replacement of spark plugs
   Check and replacement of a cover and rotor of the distributor of ignition
   Replacement of cooling liquid and washing of the cooling system
   Check of system of regeneration of vapors of fuel
   Check of system of production of the fulfilled gases
   Replacement of oil and the filter in the automatic transmission
   Replacement of oil in the mechanical transmission
   Replacement of oil in the transfer case on all-wheel drive cars with the automatic transmission
   Replacement of oil in reverse main gear on all-wheel drive cars
   Check and replacement of the valve and hose of ventilation of a case (PCV)
   Check and adjustment of gaps in the drive of Valves
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment

Toyota RAV4>> Maintenance>> Check of levels of operational liquids>> Cooling liquid
Do not allow hit of cooling liquid on clothes and a paint and varnish covering of a body. Otherwise wash out a surface a large amount of water.
Collect and utilize the merged cooling liquid.

The liquid cooling system of the engine closed, has the broad tank located in front at the left in a motor compartment as a compensation element. The broad tank is connected by a hose to the basis of a jellied mouth of a radiator. During the operation of the engine cooling liquid due to heating extends, and a part of liquid through шлаг gets to a broad tank. When cooling the engine the volume of cooling liquid decreases, and it from a broad tank comes back to the cooling system, providing optimum level.
Regularly check the level of cooling liquid. It has to be between tags of FULL and LOW on a broad tank. Level of liquid changes depending on engine temperature. At the cold engine level has to be about a tag of LOW or slightly above it. After warming up of the engine level has to be about a tag of FULL or slightly below it. Otherwise remove a stopper from a broad tank and add cooling liquid. Use only cooling liquid on the basis of ethylene glycol and the distilled water. Do not use additional inhibitory and other additives. If only the small amount of cooling liquid is required, it is possible to add the clear distilled water.
Do not pour cooling liquid above the mark FULL: excess liquid at expansion will follow from the cooling system via the safety valve located in a stopper.
Bystry falling of level of cooling liquid indicates a leak and need of its elimination. Check a condition of a radiator, the water pump, hoses, connections and traffic jams of discharge for existence of dribble traces on them. If leaks are not found, check for service stations pressure of opening of the valve in a radiator cover.
At big loss of cooling liquid add only it after cooling of the engine to avoid an exit it out of operation because of sharp cooling.

When opening a cover of a radiator on the hot engine be careful as the coming-out vapors can lead to severe burns. Close a radiator cover a thick layer of fabric and slowly turn off a cover to the hissing sound. After the hissing termination slowly turn off and uncover a radiator.

When checking level of cooling liquid check its state. Liquid has to be pure and transparent. If cooling liquid has brown color or color of a rust, merge liquid, wash out the cooling system and fill in fresh cooling liquid.
Without fail change cooling liquid after carrying out any works on cooling system elements with discharge of cooling liquid. If at repair the head of the block of cylinders, laying of a head of the block, a radiator or the heat exchanger of oil was replaced, fill in fresh cooling liquid in the cooling system. It is connected with the fact that anticorrosive additive in cooling liquid during the operation of the engine is besieged and creates anticorrosive protection. In the cooling liquid which was in operation, anticorrosive additives are insufficiently active to form a protective layer on again established details.