H7 glow lamps of elevated pressure can burst when replacing therefore these lamps should be replaced in gloves and goggles.
Do not concern a glass flask of a lamp barehanded. Fatty traces on a lamp lead to darkening of a flask and a bystry exit of a lamp out of operation. Surely replace the failed lamps with lamps of the same type. Wipe the fatty spots arising on imprudence with a pure lint-free rag or alcohol.
You make replacement of a headlight as follows.
Take the glow lamp from a headlight.
For access to the lower bolts of fastening of a headlight on models till 2001 remove the decorative cover located under a headlight, and on models since 2001 — facing of a radiator and the forward panel of facing of headlights.
Fig. 15.50. A headlight and components surrounding it on models till 2001: 1 – decorative cover; 2 – headlight; 3 – lamp of the index of turn; 4 – front bumper; 5 – cover of side extension of a bumper; 6 – lamp of the index of turn; 7 – headlight; 8 – decorative cover
Fig. 15.51. A headlight and components surrounding it on models since 2001: 1 – headlight; 2 – facing of a radiator; 3 – headlight; 4 – amplifier of a bumper; 5 – forward panel of facing of headlights; 6 – sound signal; 7,9,11,13 – lamps of indexes of turn; 8, 12 – fog lights; 10 – front bumper
Turn out screws and remove a headlight from the car (
You make installation of a headlight in the sequence, the return to removal. After installation check and if necessary adjust the direction of a beam of light of headlights.