Device and repair of Toyota RAV4 SUVs (Toyota RAV) - Adjustment of the lifting and movable panel of a roof-//

Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windshield and motionless glasses
   Removal and installation of a cowl
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating grate
   Removal and installation of an upholstery of doors
   Doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of the luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of finishing of the dashboard
   Removal and installation of casings of a steering column
   Removal and installation of the dashboard
   Removal and installation of seats
   Adjustment of the lifting and movable panel of a roof
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Body>> Adjustment of the lifting and movable panel of a roof
You carry out adjustment of position of the lifting and movable panel of a roof as follows:
Lift glass of the lifting and movable panel of a roof and leave it in this situation.
Adjustment of situation consists in removal of the engine of the drive and movement of cables before combination of tags on cables and a frame from two parties of the lifting and movable panel of a roof. For further adjustment make the following:

Fig. 14.62. An arrangement of screws (two screws are invisible) fastenings of glass of the lifting and movable panel of a roof


– turn out 4 screws and remove glass of the lifting and movable panel of a roof (fig. 14.62) ;

Fig. 14.63. Arrangement of screws of fastening of the top console


– remove a plafond of illumination of salon and open a cover for access to the engine of the drive of the lifting and movable panel of a roof and turn out screws of fastening of the top console (fig. 14.63) ;

Fig. 14.64. Arrangement of screws of fastening of the engine of the drive of the lifting and movable panel of a roof


– turn out screws and remove the engine, disconnecting it from a pulley with cables of the drive of the lifting and movable panel of a roof (fig. 14.64) ;

Fig. 14.65. Combination of tags on a cable and a frame of the lifting and movable panel of a roof


– move the end of a cable of the drive of the lifting and movable panel of a roof before combination of tags on cables and a frame from two parties of the lifting and movable panel of a roof (fig. 14.65) ;
– after adjustment install the engine of the drive of the lifting and movable panel of a roof and the top console;
– adjust the provision of forward and back parts of the lifting and movable panel of a roof for what weaken screws of fastening of glass and shift it forward or back on the distance providing reliable consolidation of forward and back parts of the lifting and movable panel of a roof and tighten screws.