Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windshield and motionless glasses
   Removal and installation of a cowl
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating grate
   Removal and installation of an upholstery of doors
   Doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of the luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of finishing of the dashboard
   Removal and installation of casings of a steering column
   Removal and installation of the dashboard
   Removal and installation of seats
   Adjustment of the lifting and movable panel of a roof
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Body>> Removal and installation of the dashboard
       PREVENTION
Cars are equipped with security systems (SRS) including safety cushions and natyazhitel of seat belts. Before work about sensors of blow, the dashboard and a steering column disconnect at first negative, and then positive plugs from the rechargeable battery and wait 2 min. It will exclude unauthorized disclosure of safety cushions and operation of natyazhitel of seat belts which can put injuries.

You make removal of the dashboard as follows:
Switch off ignition and disconnect a wire of "weight" from the rechargeable battery.
Remove finishing panels about dashboards and the central console.
Remove a combination of devices.
Disconnect the electric socket from a safety cushion of the forward passenger and on models since 2001 of release, remove a safety cushion.
Remove the radio receiver from the dashboard.
Remove the control panel the conditioner.
Remove the lower left panel of finishing and the amplifier of the panel. Turn out bolts of fastening of a steering column and reject it from the dashboard down.

Fig. 14.56. An arrangement of electric sockets of the dashboard on models since 2001 годамоделях since 2001


Mark and disconnect electric sockets from the dashboard ( fig. 14.56 ).

Fig. 14.57. An arrangement of the main electric sockets of the dashboard on models till 2001


On models till 2001 disconnect the main electric sockets from each party of the dashboard and turn out two bolts of fastening of wires of weight in the center of the dashboard ( fig. 14.57 ).

Fig. 14.58. An arrangement of bolts, screws and nuts of fastening of the dashboard on models till 2001


Fig. 14.59. An arrangement of bolts of fastening of the amplifier of the dashboard on models till 2001


Turn out all bolts, screws and nuts of fastening of the dashboard to a car body, then lift the panel and through a door, take from the car ( fig. 14.58 ). It is laborious work and it is necessary to carry out it with the assistant. Also, perhaps, it will be required to turn out bolts and to remove the amplifier of the dashboard ( fig. 14.59 ).
You make installation of the dashboard in the sequence, the return to removal.