Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windshield and motionless glasses
   Removal and installation of a cowl
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating grate
   Removal and installation of an upholstery of doors
   Doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of the luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of finishing of the dashboard
   Removal and installation of casings of a steering column
   Removal and installation of the dashboard
   Removal and installation of seats
   Adjustment of the lifting and movable panel of a roof
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Body>> Removal and installation of the central console
       PREVENTION
Cars are equipped with security systems (SRS) including safety cushions and natyazhitel of seat belts. Before work about sensors of blow, the dashboard and a steering column disconnect at first negative, and then positive plugs from the rechargeable battery and wait 2 min. It will exclude unauthorized disclosure of safety cushions and operation of natyazhitel of seat belts which can put injuries.

You make removal of the central console as follows:
Switch off ignition and disconnect a wire of "weight" from the rechargeable battery.
Lift the lever of the parking brake.
If the car is equipped with the mechanical transmission, unscrew the button from the lever of gear shifting and remove a gear shifting lever cover.

Fig. 14.45. Removal of a decorative overlay of the lever of the selector on the cars since 2001 equipped with the automatic transmission


If the car is equipped with the automatic transmission, remove a decorative overlay of the lever of the selector ( fig. 14.45 ).
On models since 2001 turn out screws and an edge of the screw-driver separate the lower part of the central decorative overlay of the dashboard. Not to scratch the panel, wind a screw-driver edge with an adhesive tape or rags.
On models till 2001 turn out screws of a lobby and middle part of the central console, then turn out the screw of fastening of a back part and, moving the console, remove it back.

Fig. 14.46. An arrangement of screws of fastening of back section of the central console on models since 2001


Fig. 14.47. A finishing cover arrangement in forward section of the central console on models since 2001


On models since 2001 turn out screws and remove back section of the central console ( fig. 14.46 ). Also uncover finishing in forward section of the central console ( fig. 14.47 ).

Fig. 14.48. An arrangement of screws of fastening of forward section of the central console on models since 2001


Turn out screws of fastening of forward section of the central console and remove it on the lever of the parking brake ( fig. 14.48 ).
Disconnect electric sockets from forward section of the central console and remove it from the car.
You make installation of the central console in the sequence, the return to removal