Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windshield and motionless glasses
   Removal and installation of a cowl
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating grate
   Removal and installation of an upholstery of doors
   Doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of the luggage compartment
      Removal and installation of a door of the luggage compartment
      Adjustment of a door of the luggage compartment
      Removal and installation of the lock of a door of the luggage compartment
      Removal and installation of the external handle and cylinder of the lock of a door of the luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of finishing of the dashboard
   Removal and installation of casings of a steering column
   Removal and installation of the dashboard
   Removal and installation of seats
   Adjustment of the lifting and movable panel of a roof
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Body>> Door of the luggage compartment>> Removal and installation of the external handle and cylinder of the lock of a door of the luggage compartment
You make removal of the external handle and cylinder of the lock of a door of the luggage compartment as follows:
Open a door of the luggage compartment and remove an upholstery and a pylevlagozashchitny film from a door.
Through an opening in the internal panel of a door release plastic clips and disconnect drafts from the external handle of a door and the cylinder of the lock.
All drafts fasten to the lock plastic clips which it is necessary with by effort to remove and take away from draft, then to extend draft from a clip opening.
On doors with electric blocking of locks disconnect electric sockets from the lock.
Through an opening in the internal panel of a door turn out screws of fastening of the external handle and remove it from a door.
Turn out the screw(s) and remove the lock cylinder from the external handle of a door.
You make installation in the sequence, the return to removal, taking into account the following:
Fix a pylevlagozashchitny film, having established it without folds and gaps. The surface on which the pylevlagozashchitny film is pasted has to be ideally pure.