Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windshield and motionless glasses
   Removal and installation of a cowl
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating grate
   Removal and installation of an upholstery of doors
   Doors
      Removal and installation of doors
      Adjustment of doors
      Removal and installation of the lock of a door
      Removal and installation of the external handle and cylinder of the lock of a door
      Removal and installation of the internal handle of the lock of a door
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of the luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of finishing of the dashboard
   Removal and installation of casings of a steering column
   Removal and installation of the dashboard
   Removal and installation of seats
   Adjustment of the lifting and movable panel of a roof
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Body>> Doors>> Removal and installation of doors
You carry out removal and installation of a door surely with the assistant as follows:
Lift against the stop door glass.
Switch off ignition and disconnect a wire of "weight" from the rechargeable battery.
Open a door and support it by supports or jacks, having laid between them and a door pure rags.
Remove an upholstery and a pylevlagozashchitny film from a door.
Mark and disconnect all electric sockets, clips of fastening of wires and a wire of connection with "weight" from a door.
Disconnect a protective corrugated cover from a door and through the opened opening extend wires from a door.

Fig. 14.25. Arrangement of bolts of fastening of the limiter of opening of a door


Turn out bolts of fastening of the limiter of opening of a door ( fig. 14.25 ).
Marker note position of hinges of a door.

Fig. 14.26. An arrangement of bolts of fastening of the lower hinge of a forward door to a door (fastening of the top hinge similar)


Fig. 14.27. An arrangement of bolts of fastening of hinges of a back door to a door


While the assistant supports a door, turn out bolts of fastening of hinges to a door and remove a door from the car ( fig. 14.26 , 14.27 ).
For access to bolts of fastening of hinges of a back door open a forward door.
You make installation of a door in the sequence, the return to removal, taking into account the following:
Fix a pylevlagozashchitny film, having established it without folds and gaps. The surface on which the pylevlagozashchitny film is pasted has to be ideally pure.