Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
   General information
   Care of a body
   Care of an upholstery and rugs
   Repair of insignificant damages of a body
   Repair of considerable damages of a body
   Service of hinges and locks
   Recommendations about replacement of a windshield and motionless glasses
   Removal and installation of a cowl
   Lock and cable of opening of the lock of a cowl
   Removal and installation of bumpers
      Removal and installation of a front bumper
      Removal and installation of a rear bumper
   Removal and installation of forward wings
   Removal and installation of facing of the Radiator
   Removal and installation of the deflector of a ventilating grate
   Removal and installation of an upholstery of doors
   Doors
   Removal and installation of glasses of doors
   Removal and installation of window regulators
   Removal and installation of an external rear-view mirror
   Removal and installation of an internal rear-view mirror
   Door of the luggage compartment
   Removal and installation of the central console
   Removal and installation of elements of finishing of the dashboard
   Removal and installation of casings of a steering column
   Removal and installation of the dashboard
   Removal and installation of seats
   Adjustment of the lifting and movable panel of a roof
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Body>> Removal and installation of bumpers>> Removal and installation of a rear bumper
You make removal of a rear bumper as follows:

Fig. 14.10. Arrangement of plastic clamps and top screw of fastening of edge of a rear bumper


Working in an arch of a back wheel, release plastic clamps and turn out the top screws of fastening of edge of a rear bumper ( fig. 14.10 ).
For release of clamps the thin screw-driver squeeze out the central core of a clamp.

Fig. 14.11. Arrangement of screws of fastening of an inner edge of a rear bumper


Open a back door and turn out the screws fixing an inner edge of a rear bumper ( fig. 14.11 ).
Remove a rear bumper from the car.
You make installation in the sequence, the return to removal.