Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
   General information
   Technical characteristics
   Removal and installation of a steering wheel with a safety cushion
   Removal and installation of a steering column
   Removal and installation of tips of steering drafts
   Replacement of covers of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the pump of the amplifier of steering
   Pumping of hydraulic system of the amplifier of steering
   Replacement of bolts of fastening of a wheel
   Wheels and tires
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Steering and running gear>> Replacement of bolts of fastening of a wheel
Operations on replacement of bolts of fastening of a forward and back wheel are carried out equally.
When replacing bolts of fastening of a wheel act as follows:
Weaken nuts of fastening of a wheel.
Lift the car and establish on support. Remove a wheel.
Remove a brake disk or the brake drum.

Fig. 13.21. Use of a stripper for expression of a bolt of fastening of a wheel from a nave of a forward wheel: 1 – nave flange; 2 – a nut, partially navernuty on a bolt; 3 – stripper


Partially screw a nut on a bolt of fastening of a wheel which needs to be replaced ( fig. 13.21 ). A stripper squeeze out a bolt from a nave, turn out a nut and remove a bolt.
Insert a new bolt from a reverse side into a nave opening, establish several thick washers on a bolt and, screwing on it a nut, press it in a nave.
Establish a brake disk or the brake drum.
Establish a wheel, screw nuts, lower the car and tighten nuts of fastening of a wheel