Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
   General information
   Technical characteristics
   Removal and installation of a steering wheel with a safety cushion
   Removal and installation of a steering column
   Removal and installation of tips of steering drafts
   Replacement of covers of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the pump of the amplifier of steering
   Pumping of hydraulic system of the amplifier of steering
   Replacement of bolts of fastening of a wheel
   Wheels and tires
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Steering and running gear>> Replacement of covers of the steering mechanism
You make replacement of covers of the steering mechanism as follows:
Tighten the parking brake and block back wheels an emphasis.
Weaken nuts of fastening of a forward wheel.
Lift a forward part of the car and establish on support.
Remove a forward wheel.
Remove a tip of steering draft and turn out a lock-nut.

Fig. 13.12. Cutting of a collar of fastening of a protective cover to the steering mechanism


Cut or weaken and remove collars of fastening of a protective cover to steering draft and the steering mechanism ( fig. 13.12 ).
Remove a protective cover, shifting it on steering draft.
Before installation of a new cover wrap up an adhesive tape a carving part of steering draft for an exception of damage of a cover.
Pulling on steering draft, establish a new protective cover and fix it by collars.
Remove an adhesive tape and screw a tip of steering draft on steering draft.
Insert a pin of the spherical hinge of a tip of steering draft into a rotary fist and fix it by a nut and a pin.
Establish a wheel, screw nuts, lower the car and tighten nuts of fastening of a wheel.
Check and if necessary adjust the angles of installation of wheels.