Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
   General information
   Specifications
   Rack of a forward suspension bracket
   Dismantling and assembly of a depreciation rack
   Forward stabilizer of cross stability
   Lower lever of a forward suspension bracket
   Rotary fist and nave of a forward wheel
   Back stabilizer of cross stability
   Shock-absorber of a back suspension bracket
   Levers of a back suspension bracket
   Spring of a back suspension bracket
   Nave and bearing of a back wheel
      Removal
      Installation
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Suspension bracket>> Nave and bearing of a back wheel>> Installation
Establish a nave on a back rotary fist and screw four bolts or nuts. After all bolts or nuts are screwed, tighten them the moment specified in specifications.
On models with one leading bridge of release of 1996 and 1997 and all-wheel drive models till 2001 establish brake shoes and connect a brake tube to the working brake cylinder.
On all-wheel drive models establish a power shaft.
Install the brake drum and a wheel.
On models with one leading bridge of release of 1996 and 1997 and all-wheel drive models till 2001 remove air from the brake system.
Establish a wheel, screw nuts, lower the car and tighten nuts of fastening of a wheel.
On all-wheel drive models tighten a nut of fastening of a shaft of the drive of a wheel to a nave the moment specified in specifications and record it the forelock.