Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
   General information
   Specifications
   Rack of a forward suspension bracket
   Dismantling and assembly of a depreciation rack
   Forward stabilizer of cross stability
   Lower lever of a forward suspension bracket
   Rotary fist and nave of a forward wheel
   Back stabilizer of cross stability
   Shock-absorber of a back suspension bracket
      Removal
      Installation
   Levers of a back suspension bracket
   Spring of a back suspension bracket
   Nave and bearing of a back wheel
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Suspension bracket>> Shock-absorber of a back suspension bracket>> Removal
Block forward wheels an emphasis. Lift a back part of the car and establish it on support. Remove a wheel.
Jack raise the longitudinal lever of a back suspension bracket to squeeze a spring and to unload the shock-absorber.

Fig. 12.18. Removal of a cover of a side upholstery for access to a nut of the top fastening of the shock-absorber on models till 2001


Fig. 12.19. Removal of a cover of a side upholstery for access to a nut of the top fastening of the shock-absorber on models since 2001


From within the car uncover a side upholstery for access to a nut of the top fastening of the shock-absorber ( fig. 12.18 , 12.19 ). Turn off a nut and remove two holder and the plug from a shock-absorber rod.

Fig. 12.20. Arrangement of a bolt of the lower fastening of the back shock-absorber


Turn out a bolt of the lower fastening and remove the shock-absorber from the car ( fig. 12.20 ).