Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
   General information
   Specifications
   Rack of a forward suspension bracket
      Removal
      Check
      Installation
   Dismantling and assembly of a depreciation rack
   Forward stabilizer of cross stability
   Lower lever of a forward suspension bracket
   Rotary fist and nave of a forward wheel
   Back stabilizer of cross stability
   Shock-absorber of a back suspension bracket
   Levers of a back suspension bracket
   Spring of a back suspension bracket
   Nave and bearing of a back wheel
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Suspension bracket>> Rack of a forward suspension bracket>> Installation
From under a wing establish a rack into place and insert hairpins of the top fastening of a rack into openings in a body. By hand screw nuts of the top fastening of a rack. You make installation of a rack of a forward suspension bracket with the assistant as it rather heavy and bulky.
Connect the lower part of a rack with a rotary fist and insert two bolts. Screw nuts, combine earlier put tags and tighten nuts.
Fix on a rack an arm with a brake hose. In the presence of ABS establish an arm of a plait of wires of the sensor of speed of rotation of a wheel.
On models since 2001 connect draft of the stabilizer of cross stability to an arm on a rack and fix it by a nut.
Establish a wheel, screw nuts, lower the car and tighten nuts of fastening of a wheel.
Tighten three nuts of the top fastening of a rack of a forward suspension bracket.
Check and if necessary adjust the angles of installation of forward wheels.