Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
   General information
   Specifications
   Anti-blocking system of brakes (ABS)
   Replacement of front brake shoes
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement of back brake shoes
   Replacement of the working brake cylinder
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of the brake system
   Replacement of brake tubes and hoses
   Pumping of the hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Replacement of cables of the parking brake
   Adjustment of provision of a pedal of a brake
   Check and replacement of the switch of a stoplight
      Check
      Replacement
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Brake system>> Check and replacement of the switch of a stoplight>> Replacement
Disconnect the electric socket from the stoplight switch.

Fig. 11.45. Measurement of a gap between a carving part of the case of the switch and the limiter of the course of a pedal of a brake: And = 0,5–2,4 mm


Weaken a lock-nut of the switch of a stoplight and turn out it from a brake pedal arm (see fig. 11.45 ).
You make installation in the sequence, the return to removal.
After installation adjust height of installation of a pedal of a brake and position of the switch of a stoplight.