Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
   General information
   Specifications
   Anti-blocking system of brakes (ABS)
   Replacement of front brake shoes
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement of back brake shoes
   Replacement of the working brake cylinder
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of the brake system
   Replacement of brake tubes and hoses
   Pumping of the hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Replacement of cables of the parking brake
   Adjustment of provision of a pedal of a brake
      Height of installation of a pedal
      Free wheeling of a pedal of a brake
      Brake pedal course stock
   Check and replacement of the switch of a stoplight
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Brake system>> Adjustment of provision of a pedal of a brake>> Free wheeling of a pedal of a brake
Press a brake pedal several times at the idle engine to create the identical pressure close to atmospheric pressure in cavities of the vacuum amplifier.

Fig. 11.46. Change of a free wheeling of a pedal of a brake: X = 1–6 mm


Press a brake pedal prior to the beginning of notable resistance and measure distance which there passed the brake pedal ( fig. 11.46 ). The free wheeling of a pedal of a brake has to be in limits of 1-6 mm.

Fig. 11.45. Measurement of a gap between a carving part of the case of the switch and the limiter of the course of a pedal of a brake: And = 0,5–2,4 mm


If the free wheeling of a pedal of a brake differs from the required value, check distance And (see fig. 11.45 ) between a carving part of the case of the switch and the limiter of the course of a pedal of a brake.