Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
   General information
   Specifications
   Anti-blocking system of brakes (ABS)
   Replacement of front brake shoes
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement of back brake shoes
   Replacement of the working brake cylinder
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of the brake system
   Replacement of brake tubes and hoses
   Pumping of the hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
      Check
      Removal
      Installation
   Adjustment of the parking brake
   Replacement of cables of the parking brake
   Adjustment of provision of a pedal of a brake
   Check and replacement of the switch of a stoplight
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Brake system>> Check and replacement of the vacuum amplifier of brakes>> Removal
Disconnect a vacuum hose, the connecting inlet pipeline and the vacuum amplifier of brakes. Be careful not to damage a vacuum hose at removal from the union of the valve of the vacuum amplifier.
Remove the main brake cylinder. On models till 2001 remove a branch pipe of an air inlet and the block of safety locks and the relay.
Remove the lower decorative panel on the left side of the dashboard.
Remove a returnable spring of a pedal of a brake.

Fig. 11.39. Fastening of the vacuum amplifier of brakes: And – a pin; In – nuts


Disconnect a pusher of the vacuum amplifier of brakes from the top part of a pedal of a brake for what take the forelock and take out a pin ( fig. 11.39 ).
From interior of the car turn off four nuts of fastening of the vacuum amplifier of brakes to a partition of a motor compartment and take the vacuum amplifier of brakes from a motor compartment.