Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
   General information
   Specifications
   Anti-blocking system of brakes (ABS)
   Replacement of front brake shoes
   Replacement of a support of a forward brake
   Check and replacement of brake disks
   Replacement of back brake shoes
   Replacement of the working brake cylinder
   Replacement of the main brake cylinder
   Replacement of sealing rings of a tank of the brake system
   Replacement of brake tubes and hoses
      Replacement of a forward brake hose
   Pumping of the hydraulic drive of brakes
   Check and replacement of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Replacement of cables of the parking brake
   Adjustment of provision of a pedal of a brake
   Check and replacement of the switch of a stoplight
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Brake system>> Replacement of brake tubes and hoses>> Replacement of a forward brake hose
Weaken nuts of fastening of a wheel and lift the car on the elevator. Remove a wheel.
For reduction of losses of brake fluid uncover a tank of the brake system, close a tank mouth polyethylene and again screw a cover. It is necessary in order that the cover hermetically closed a tank.

Fig. 11.38. A reversing of a connecting nut of fastening of a brake tube to a brake hose


On an arm turn out a connecting nut of fastening of a brake tube to a brake hose ( fig. 11.38 ). Turn out a nut a cutting cap key, and the second key hold a brake hose from a provorachivaniye.
Passatizhami remove an U-shaped clip of fastening of a brake hose to an arm.
On a support turn out a hollow bolt of fastening of a brake hose.
Turn out a bolt of fastening of an arm of a brake hose to a rack of a forward suspension bracket and remove a hose from the car.
You make installation in the sequence, the return to removal, taking into account the following.
Make sure that the brake hose is not overwound and does not concern mobile parts of a suspension bracket. When fastening a brake hose to a support use new sealing laying.
Remove air from the hydraulic brake system.