On models till 2001 uncover the air filter and the block of safety locks and the relay on the left side of a motor compartment.
Fig. 11.35. Main brake cylinder: And – the electric socket; In – places of connection of brake tubes; With – nuts
Disconnect the electric socket from the sensor of level of brake fluid (
Uncover a compensation tank of the brake system and, using the syringe, pump out brake fluid.
Mark the brake tubes suitable to the main brake cylinder. Put pure rags under the main brake cylinder for collecting the leaked brake fluid.
Turn off connecting nuts of fastening of brake tubes and take tubes aside from the main brake cylinder. Close the ends of tubes suitable traffic jams.
The brake fluid used in hydraulic system of brakes is poisonous therefore at hit it on skin immediately wash out an affected area a large amount of water. Brake fluid dissolves paint and plastic therefore at hit of liquid on a paint and varnish covering of the car wash out its large number waters.
Turn out two nuts and remove the main brake cylinder from the vacuum amplifier of brakes together with laying. Check a condition of a sealing ring in an end face of the main brake cylinder and if necessary replace it.