Device and repair of Toyota RAV4 SUVs (Toyota RAV) - Removal-//

Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
   General information
   Specifications
   Shaft of the drive of forward wheels
   Shaft of the drive of back wheels on all-wheel drive cars
   Replacement of protective covers of hinges of a shaft of the drive of a wheel
   Driveshaft
   Basic bearing of the driveshaft
   Sealing cuffs of reverse main gear
   Differential on all-wheel drive cars
      Removal
      Installation
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Driveshaft and shaft of the drive of driving wheels>> Differential on all-wheel drive cars>> Removal
Emphasis block forward wheels to interfere with movement of the car. Lift a back part of the car and establish it on support. Lower the lever of the parking brake and install the gear shifting lever in neutral situation.
Merge oil from a differential case.
Apply with paint or a marker combination tags on a flange of differential and a flange of the internal CV JOINT of a shaft of the drive.

Fig. 10.4. An arrangement of nuts of fastening of the internal CV JOINT of a back shaft of the drive to a differential flange


Turn out 4 nuts, separate internal CV JOINTS of shaft of the drive from flanges of differential and fix by a soft wire them on a body (see fig. 10.4 )

       PREVENTION
Do not allow shaft to hang on external CV JOINTS.

Apply with paint or a marker combination tags on a flange of the main reverse gear and a flange of the driveshaft. It is necessary for repeated installation of a shaft in a starting position for preservation of balancing of a shaft.

Fig. 10.10. A reversing of bolts of fastening of the back universal hinge of the driveshaft to a flange of the main reverse gear


Turn out nuts and bolts of fastening of the back universal hinge of the driveshaft to a flange of the main reverse gear (see fig. 10.10 ). For access to nuts and bolts turn the driveshaft. Fix by a soft wire a back part of the driveshaft, do not allow it to hang on the basic bearing.

Fig. 10.17. An arrangement of bolts of the top fastening of an arm in a back part of differential


Fig. 10.18. Arrangement of bolts of fastening of a forward part of differential


Support differential by a transmission jack and turn out two bolts of the top fastening of an arm in a back part of differential ( fig. 10.17 ). Turn out two bolts of fastening of a forward part of differential ( fig. 10.18 ). Slowly lower and take differential from under the car.