Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
   General information
   Specifications
   Shaft of the drive of forward wheels
      Removal
      Installation
   Shaft of the drive of back wheels on all-wheel drive cars
   Replacement of protective covers of hinges of a shaft of the drive of a wheel
   Driveshaft
   Basic bearing of the driveshaft
   Sealing cuffs of reverse main gear
   Differential on all-wheel drive cars
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Driveshaft and shaft of the drive of driving wheels>> Shaft of the drive of forward wheels>> Installation

Fig. 10.3. Removal of a lock ring from the internal CV JOINT


Remove a lock ring from the internal CV JOINT and establish a new ring (fig. 10.3) .
Oil vents of the internal CV JOINT gearbox.
Grease working edges of a sealing cuff of differential and, having combined vents on a shaft and a semi-axial gear wheel of differential, insert a drive shaft into the transmission before fixing by its lock ring.
If the power or intermediate shaft with the basic bearing is established, screw bolts of fastening of an arm of the basic bearing or establish a lock ring.
Grease vents of the external CV JOINT and, moving a rotary fist towards the car, insert a shaft into a nave.
Install the lower cross lever of a forward suspension bracket on the spherical hinge of a rotary fist and fix it by a bolt and nuts.
Fix by a nut the spherical hinge of steering draft on a rotary fist.
Screw a nut of fastening of a shaft of the drive to a nave. On models since 2001 it is necessary to use a new nut. Previously tighten a nut rather strongly.
Having undertaken the internal CV JOINT, but not a drive shaft, be convinced that the shaft of the drive is reliably recorded in the transmission.
Establish a wheel and fix it by nuts. Lower the car.
On the car standing on wheels tighten a nut of fastening of a shaft of the drive to a nave the moment of 216 N • m. On models till 2001 screw a lock-nut and the forelock record it from an otvorachivaniye. On models since 2001 hammer with the hammer and a punch a nut fillet into a drive shaft groove.
Fill in oil in the transmission.