Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
   General information
   Specifications
   Repair of the transmission
   The repair and adjusting work performed on cars with the mechanical transmission
      Replacement of cables of control of the transmission
      Removal and installation of the lever of gear shifting
      Check and replacement of the switch of lamps of a backing
      Replacement of the oil heater of the transmission
      Removal and installation of the mechanical transmission on cars with one leading bridge
      Removal and installation of the mechanical transmission on fully - driving cars
   The repair and adjusting work performed on cars with the automatic transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Transmission>> The repair and adjusting work performed on cars with the mechanical transmission>> Replacement of the oil heater of the transmission
The oil heater of the transmission was installed only on all-wheel drive cars of release till 2001.
Removal
Remove the lower mudguards of a motor compartment.
Remove a front bumper.
Turn off connecting nuts of fastening of hoses to branch pipes of the oil heater.

Fig. 9.3. The oil heater of the transmission on models 4WD till 2001: 1 – long clip; 2 – oil heater of the transmission; 3 – pillows; 4 – clip; 5 – sealing ring; 6 – connector; 7 – clip; 8 – pillows; 9 – clip; 10 – oil pipeline No. 2; 11 – oil pipeline No. 1; 12 – sealing ring; 13 – angular branch pipe; 14 – clip; 15 – pillows; 16 – clip; 17 – left mudguard of a motor compartment; 18 – bumper; 19 – right mudguard of a motor compartment; 20 – combination of tags


Turn out bolts, remove clips and the oil heater from the car (fig. 9.3) .
Installation
You make installation in the sequence, the return to removal, taking into account the following.
At connection of pipelines replace sealing rings.
Make a short trip for filling of a radiator with oil, then stop the car, be convinced of lack of dribble of oil and check its level in the transmission.