Pump out coolant from air conditioning system at service station.
Switch off ignition and disconnect a wire of "weight" from the rechargeable battery.
Lift a forward part of the car and establish on support. Remove the right antisplash guard of a motor compartment.
Take off a conditioner compressor drive belt.
Fig. 4.33. Conditioner compressor: 1 – electric sockets and wires; 2 – top bolts of fastening of the compressor of the conditioner; 3 – pipelines
Disconnect the electric socket and pipelines
from the conditioner compressor
Turn out the top and lower bolts of fastening of the compressor of the conditioner and remove it from the car.
If the new compressor is installed, fill in in it necessary amount of oil of the required brand according to data of the compressor.
You make installation of the compressor in the sequence, the return to removal, taking into account the following.
Replace all sealing rings.
Fill air conditioning system at service station.