Toyota PAB4-Toyota RAV4
1. Operation of the car
2. Maintenance
3. Engines
   Repair of the engine 3S-FE without its removal from the car
   Repair of the engine 1AZ-FE without its removal from the car
   Diagnostics and preparation of the engine for capital repairs
      Specifications for check
      General information
      Check of pressure of oil
      Check of a compression in engine cylinders
      Diagnostics of the engine by means of the vacuum gage
      Alternative to capital repairs of the engine
      General recommendations about removal and installation of the engine
      Removal and installation of the engine
      Sequence of dismantling of the engine
      Start and running in of the engine after capital repairs
4. Cooling systems and conditioning
5. Fuel system and system of production of the fulfilled gases
6. System of ignition
7. The control system and decrease in toxicity of the fulfilled gases
8. Coupling
9. Transmission
10. Driveshaft and shaft of the drive of driving wheels
11. Brake system
12. Suspension bracket
13. Steering and running gear
14. Body
15. Electric equipment
Schemes of electric equipment


Toyota RAV4>> Engines>> Diagnostics and preparation of the engine for capital repairs>> General recommendations about removal and installation of the engine
If the decision on removal of the engine for carrying out capital repairs or repair of the main knots was made, then it is necessary to execute some preparatory activities.
If the engine is removed for repair, it is necessary to choose the place for work, to provide space for service and storage of spare parts. Repairs are recommended to be made at car repair shop or in a garage with an equal horizontal floor with a pure hard coating.
Before removal clear of pollution and wash up the engine and a motor compartment. For removal of the engine use the lifting mechanism allowing to lift safely the power unit.
If you remove the engine for the first time, it is necessary to invite the skilled expert. Some works should be performed with the assistant.
At removal and installation of the power unit be very attentive. Rash actions can be the cause of serious injuries. In advance consider the actions.